Zhang, G. et al. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells. Chem. Rev. 118, 3447–3507 (2018).
Baran, D. et al. Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. Nat. Mater. 16, 363–369 (2016).
Du, X. et al. Efficient polymer solar cells based on non-fullerene acceptors with potential device lifetime approaching 10 years. Joule 3, 215–226 (2019).
Cha, H. et al. An efficient, ‘burn in’ free organic solar cell employing a nonfullerene electron acceptor. Adv. Mater. 29, 1701156 (2017).
Du, X. et al. Unraveling the microstructure-related device stability for polymer solar cells based on nonfullerene small–molecular acceptors. Adv. Mater. 32, 1908305 (2020).
Li, N. et al. Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor–acceptor demixing. Nat. Commun. 8, 14541 (2017).
Ghasemi, M. et al. Delineation of thermodynamic and kinetic factors that control stability in non-fullerene organic solar cells. Joule 3, 1328–1348 (2019).
Wong, H. C. et al. Morphological stability and performance of polymer–fullerene solar cells under thermal stress: the impact of photoinduced PC60BM oligomerization. ACS Nano 8, 1297–1308 (2014).
Zhu, Y. et al. Rational strategy to stabilize an unstable high-efficiency binary nonfullerene organic solar cells with a third component. Adv. Energy Mater. 9, 1900376 (2019).
Ye, L. et al. Quantitative relations between interaction parameter, miscibility and function in organic solar cells. Nat. Mater. 17, 253–260 (2018).
Hu, H. et al. Effect of ring-fusion on miscibility and domain purity: key factors determining the performance of PDI-based nonfullerene organic solar cells. Adv. Energy Mater. 8, 1800234 (2018).
Ma, W. et al. Domain purity, miscibility, and molecular orientation at donor/acceptor interfaces in high performance organic solar cells: paths to further improvement. Adv. Energy Mater. 3, 864–872 (2013).
Treat, N. D. et al. Polymer–fullerene miscibility: a metric for screening new materials for high-performance organic solar cells. J. Am. Chem. Soc. 134, 15869–15879 (2012).
Zhang, C. et al. Understanding the correlation and balance between the miscibility and optoelectronic properties of polymer–fullerene solar cells. J. Mater. Chem. A 5, 17570–17579 (2017).
Ghasemi, M. et al. Panchromatic sequentially cast ternary polymer solar cells. Adv. Mater. 29, 1604603 (2017).
Li, S. et al. An unfused-core-based nonfullerene acceptor enables high-efficiency organic solar cells with excellent morphological stability at high temperatures. Adv. Mater. 30, 1705208 (2018).
Yuan, J. et al. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core. Joule 3, 1140–1151 (2019).
Yang, W. et al. Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive. Nat. Commun. 11, 1218 (2020).
Ye, L. et al. Miscibility–function relations in organic solar cells: significance of optimal miscibility in relation to percolation. Adv. Energy Mater. 8, 1703058 (2018).
Treat, N. D., Mates, T. E., Hawker, C. J., Kramer, E. J. & Chabinyc, M. L. Temperature dependence of the diffusion coefficient of PCBM in poly(3-hexylthiophene). Macromolecules 46, 1002–1007 (2013).
Zhao, W. et al. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability. Adv. Mater. 28, 4734–4739 (2016).
Treat, N. D. et al. Interdiffusion of PCBM and P3HT reveals miscibility in a photovoltaically active blend. Adv. Energy Mater. 1, 82–89 (2011).
Ye, L. et al. Quenching to the percolation threshold in organic solar cells. Joule 3, 443–458 (2019).
Yazmaciyan, A. et al. Recombination losses above and below the transport percolation threshold in bulk heterojunction organic solar cells. Adv. Energy Mater. 8, 1703339 (2018).
Bartelt, J. A. et al. The importance of fullerene percolation in the mixed regions of polymer–fullerene bulk heterojunction solar cells. Adv. Energy Mater. 3, 364–374 (2013).
Li, S. et al. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells. Adv. Mater. 28, 9423–9429 (2016).
Flory, P. J. Principles of Polymer Chemistry (Cornell Univ. Press, 1953).
Rubinstein, M. & Colby, R. H. Polymer Physics (Oxford Univ. Press, 2003).
Batzer, H. & Kreibich, U. Connections between glass transition-temperature, thermodynamic and mechanic values for predicting material properties from the chemical-structure. Die Angew. Makromol. Chem. 105, 113–130 (1982).
Kreibich, U. & Batzer, H. Influence of the segment structure and crosslinking on the glass-transition Tg-possibilities of predicting Tg using the values of cohesive energy ecoh. Die Angew. Makromol. Chem. 83, 57–112 (1979).
CAS Google Scholar
Lee, C. J. Correlations of elastic modulus, cohesive energy density and heat capacity jump of glassy polymers. Polyrn. Eng. Sci. 27, 1015–1017 (1987).
Roberts, R. J., Rowe, R. C. & York, P. The relationship between Young’s modulus of elasticity of organic solids and their molecular structure. Powder Technol. 65, 139–146 (1991).
Root, S. E., Alkhadra, M. A., Rodriquez, D., Printz, A. D. & Lipomi, D. J. Measuring the glass transition temperature of conjugated polymer films with ultraviolet–visible spectroscopy. Chem. Mater. 29, 2646–2654 (2017).
Sharma, A., Pan, X., Campbell, J. A., Andersson, M. R. & Lewis, D. A. Unravelling the thermomechanical properties of bulk heterojunction blends in polymer solar cells. Macromolecules 50, 3347–3354 (2017).
Balar, N. et al. The importance of entanglements in optimizing the mechanical and electrical performance of all-polymer solar cells. Chem. Mater. 31, 5124–5132 (2019).
Sperling, L. H. Introduction to Physical Polymer Science (John Wiley & Sons, 2005).
Lodge, T. P. Reconciliation of the molecular weight dependence of diffusion and viscosity in entangled polymers. Phys. Rev. Lett. 83, 3218–3221 (1999).
Thomas, N. L. & Windle, A. H. A theory of case II diffusion. Polymer 23, 529–542 (1982).
Matsuoka, S. (ed.) Relaxation Phenomena in Polymers (Hanser, 1992).
Balar, N. & O’Connor, B. T. Correlating crack onset strain and cohesive fracture energy in polymer semiconductor films. Macromolecules 50, 8611–8618 (2017).
Stafford, C. M. et al. A buckling-based metrology for measuring the elastic moduli of polymeric thin films. Nat. Mater. 3, 545–550 (2004).
Virkar, A. A., Mannsfeld, S., Bao, Z. & Stingelin, N. Organic semiconductor growth and morphology considerations for organic thin-film transistors. Adv. Mater. 22, 3857–3875 (2010).
Kim, J.-S. et al. Tuning mechanical and optoelectrical properties of poly(3-hexylthiophene) through systematic regioregularity control. Macromolecules 48, 4339–4346 (2015).
Collins, B. A. et al. Molecular miscibility of polymer−fullerene blends. J. Phys. Chem. Lett. 1, 3160–3166 (2010).
Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments ASTM E1171-15 (ASTM International, 2015).
White, J. R. On internal stress and activation volume in polymers. J. Mater. Sci. 16, 3249–3262 (1981).
Mehrer, H. Diffusion in Solids: Fundamentals, Methods, Materials, Diffusion-Controlled Processes (Springer Science & Business Media, 2007).
Deppe, D. D., Miller, R. D. & Torkelson, J. M. Small molecule diffusion in a rubbery polymer near Tg: effects of probe size, shape, and flexibility. J. Polym. Sci., B: Polym. Phys. 34, 2987–2997 (1996).
Carpenter, J. H. et al. Competition between exceptionally long-range alkyl sidechain ordering and backbone ordering in semiconducting polymers and its impact on electronic and optoelectronic properties. Adv. Funct. Mater. 29, 1806977 (2019).
Alkhadra, M. A. et al. Quantifying the fracture behavior of brittle and ductile thin films of semiconducting polymers. Chem. Mater. 29, 10139–10149 (2017).
Kozub, D. R. et al. Polymer crystallization of partially miscible polythiophene/fullerene mixtures controls morphology. Macromolecules 44, 5722–5726 (2011).
Abraham, M. J. et al. GROMACS: high performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX 1-2, 19–25 (2015).
Jorgensen, W. L., Maxwell, D. S. & Tirado-Rives, J. Development and testing of the OPLS all-atom force field on conformational energetics and properties of organic liquids. J. Am. Chem. Soc. 118, 11225–11236 (1996).
Frisch, M. J. et al. Gaussian 16 Rev. C.01 (Wallingford, 2016).
Ryno, S. M. & Risko, C. Deconstructing the behavior of donor–acceptor copolymers in solution & the melt: the case of PTB7. Phys. Chem. Chem. Phys. 21, 7802–7813 (2019).
